AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc
previous page Back
Close up image of a surface that look like the staining substance has bled through the paint film.

Causes

  • Failure to apply a proper primer to hardboard before applying the topcoat.
  • Allowing hardboard siding to weather before being painted.
  • Use of dark paint colors, which absorb heat and can accelerate wax bleed.
  • Too little paint; wax bleeding is more likely with thin paint films.
  • Applying a hard finish over a softer coat without priming, or painting over a glossy surface without sanding.
  • Using low-quality paints with lower resin content that allows wax to bleed through the paint film.

Solutions

  • Unprimed hardboard should be primed or painted within 30 days. Factory-primed hardboard should be painted within 90 days of installation. Apply the recommended primer and two topcoats on unprimed hardboards.
  • If wax bleed is observed, first determine if wax bleeding is the problem:
    • Place a few drops of bleach on the discolored area. Household bleach does not affect wax so if there is no whitening or bleaching, the stain is likely to wax.
    • Place a few drops of water on both normal and discolored areas. If the water beads up and runs off, a wax film probably exists.
  • If the wax is light or moderate, the area can be cleaned with a detergent solution. In cases of severe bleeding, the surface must be cleaned thoroughly with mineral spirits. Dispose of all waste materials in accordance with local regulations.
  • Allow the surface to dry thoroughly before priming. Prime the surface with a high-quality primer and finish with high-quality exterior paint.

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot