AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PREMIUM® High Build Coating No. 4700

Avg. Rating:

BEHR PREMIUM Exterior High Build Coating is formulated as a self-priming concrete and masonry coating. It is a flexible,long-lasting waterproof smooth coating that withstands wind driven rain up to 98 mph and may be applied directly to “HOT” masonry surfaces with pH levels up to 13 that do not require 30 days of concrete cure prior to first use and no primer is required.

5 Gallon BEHR PREMIUM High Build Coating 4700

Technical Data Sheets

Safety Data Sheets

Finish

N/A

Best For Use In

Recommended for use on properly prepared exterior vertical above-grade masonry, stucco, concrete block, poured and pre-cast concrete, brick, wood and metal.

Coverage

75-125 Sq. Ft per Gallon dependent on application method and substrate porosity.

PRODUCT USAGE
  • Two paint rollers, two coat icon.

    2 Coats
    Required

  • Paint coverage icon.

    Spread Rate
    75-125 Sq. Ft

  • Clock icon

    1 Hr.
    Dry To Touch
    2-4 Hrs.
    Recoat Time

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

Use on properly prepared exterior vertical above-grade masonry, stucco, concrete block, poured and pre-cast concrete, brick, wood and metal.

PREPARATION

  • Do not apply when rain or heavy dew is expected within 24 hours. Do not apply to surfaces with excessive moisture content.
  • All surfaces must be clean, sound, dry and free of dirt, dust, efflorescence, chalk, laitance, release agents, oil, grease, mildew, and other foreign materials.
  • All voids and cracks wider than 1/16" (1.5 mm), cracked mortar joints, and meetings of dissimilar materials should be patched with appropriate sealants.
  • Prime all bare wood or metal with a product such as BEHR PREMIUM PLUS Multi-Surface Primer & Sealer No. 436.

Read More

APPLICATION

  • Use product when the surface and air temperatures are between 35-90° F.
  • Coverage: Recommended Film Thickness wet 20-30 mils, 10-15 mils dry.
  • Theoretical Spread Rate: 40-80 Sq. Ft./Gal depending on the surface texture, porosity, and application method.
  • Do not thin or apply at a greater spread rate. Product is formulated for use at package consistency only.
  • Important: Properly fill any voids and pinholes by applying at the recommended wet film thickness. Additional spot application may be needed depending on the porosity of the surface. If voids or pinholes are still open, re-apply product to these areas.
  • Brush: Nylon/polyester.
  • Roller: Use a high quality 3/4"-1 1/4" nap.
  • Conventional Roller: Apply in two coats and check application with a wet film gauge to ensure that the minimum wet film thickness of each coat is obtained. Keep roller cover saturated with material at all times. Finish off with a dry roller in downward direction to ensure a uniform finish with the stipple all in one direction. Second coat should be applied when material is no longer tacky (2-4 hours).
  • Airless Spray: 025"-.029" tip.
  • Filter: Remove. Must be topcoated with exterior BEHR® premium paints for accent and deep base colors. This is a breathable coating designed to let moisture vapor escape; do not use as a vapor barrier. Do not apply when the temperature is below 35° F (1.7° C) or when relative humidity is above 90%. Ambient temperature must be 5° F above dew point and rising.

Read More

DRY TIME

  • Low temperatures or high humidity conditions will affect drying time.
  • Recoat: 2-4 hours or when product is no longer tacky.

Read More

DISPOSAL

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • To recycle or properly dispose of paint in your community call your household refuse collection service.

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.​ To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.​ Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey.​ To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

To consult with a Behr Paint Company Representative, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot