AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PRO® Concrete & Masonry Primer No. PR060

Avg. Rating:

BEHR PRO Concrete & Masonry Primer is an interior/exterior acrylic primer formulated to seal above-grade concrete and masonry surfaces. It provides great adhesion and has excellent alkali and efflorescence resistance. It can be applied in temperatures down to 35°F and tolerates high pH levels (up to 13) for application to new concrete and masonry in as soon as seven days.

5 gallon bucket of BEHR PRO Concrete & Masonry PR60

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

Interior & Exterior

Best For Use In

200 - 275 sq ft per gallon

PRODUCT USAGE

Use on properly prepared, above-grade concrete and masonry surfaces.

SURFACE PREPARATION

  • Surfaces must be clean, free of bond breakers, form release agents, dust, chalk, oil, grease, wax, loose & peeling paint, mold & mildew stains, and all foreign substances.
  • Do not apply to shiny or slick surfaces or loss of adhesion may occur. These surfaces can be prepared with chemical etchers and/or sandblasting.
  • Allow at least 24 hours for joint sealants to dry before the application of this primer.

Read More

APPLICATION

  • Eye protection is recommended.
  • For best results, apply when air, material and surface temperatures are between 35°F and 90°F.
  • When the air temperature is at 35°F, substrates may be colder; prior to painting, check to be sure the air, surface, and material temperatures are above 35°F and at least 5°F above the dew point.
  • Do not apply at air or surface temperatures below 35°F or when air or surface temperatures may drop below 35°F within 48 hours.
  • Temperatures above 90°F can cause the paint to dry too fast, whereas temperatures below 35°F can inhibit proper film formation.
  • Stir thoroughly before and occasionally during use.
  • Apply using a brush, roller or spray. Use nylon/polyester brush and 1/2" – 3/4" nap roller cover, depending on surface texture. For airless spray application, tip size should be .015 - .019.
  • May be tinted with up to 6 fluid ounces of universal colorant per gallon.
  • DO NOT THIN. Product is formulated for use at package consistency only.

Read More

DRY TIME @ 77°F (25°C) AND 50% RELATIVE HUMIDITY

  • Dries to touch in 1 hour or recoat after 2 hours.
  • Application at lower temperatures, high humidity or poor ventilation will affect dry time.

Read More

CLEAN UP & DISPOSAL

  • Clean all tools and equipment with warm, soapy water.
  • Do not dispose of this product down a drain. If spilled, contain material and remove with an inert absorbent.
  • Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.
  • For recycling or disposal of empty containers, unused product and soiled rags, contact your household refuse collection service

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.​ To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.​ Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey.​ To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

To consult with a Behr Paint Company Representative, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot