BEHR Premium® Water-Based Stain & Poly In One
BEHR Premium Water-Based Stain & Poly in One delivers rich color and protection in one easy step. This formula can be tinted to a wide range of popular interior colors and provides a warm look and durable protection to your interior wood surface. This high-performance stain & poly in one dries quick to a uniform finish, allowing you to shorten your project time and achieve beautiful results.
See Our Selection of Water-Based Wood Stains and Finishes
Finish
Available in Satin and Gloss finish.
Best For Use In
Properly prepared interior surfaces such as furniture, moldings, cabinets, trim, and wood doors. Do not use on floors.
Coverage
125 Sq. Ft. / Qt.
PRODUCT USAGE
-
Prep
Before Use -
2 Coats
Required -
Spread Rate:
125 Sq. Ft./Qt. -
Clean-Up
Soap & Water
PROTECT FROM FREEZING. Do Not Use Without the Addition of Tinting Colorants.
Surface Preparation
FOR PREVIOUSLY FINISHED WOOD THAT IS NOT BEING STRIPPED:- Before starting, the surface must be dry, clean and free of dirt, grease, and glue.
- Lightly sand the existing finish with 400 grit sandpaper to ensure adhesion. Remove all sanding dust.
Read More
Product Preparation and Color Testing
- Stir BEHR Premium Stain & Poly In One thoroughly before and occasionally during use. Do not thin.
- Always test Stain & Poly on a scrap piece or hidden area of wood to verify desired color.
Read More
Application
- Using a high-quality nylon/polyester bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess.
- Apply a very THIN, even coat following the direction of the grain.
- Make sure to maintain a “wet” edge.
- To minimize the brush marks and bubbles after staining, tip off the surface by holding the brush at a 45-degree angle and lightly run the bristles over the entire length of the wood.
- Let the first coat dry for 1 hour or more.
- Dry time may be extended due to high humidity, low temperatures, and inadequate ventilation or if the coat is applied too thick.
- Lightly sand the surface between coats with fine sandpaper (#400 grit).
- Remove all dust. Brush on a second thin coat following directions above.
- To deepen the color, apply a third coat. NOTE: For additional protection, without adding color, add a coat of BEHR Premium Fast Drying Polyurethane.
- Please refer to the back label of the container for application instructions.
Read More
Disposal
- For disposal of empty containers and unused product, contact your household refuse collection service
Read More
Read More
Reviews
Often Bought Together
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
BEHR Premium® Water-Based Stain & Poly In One
Satin Clear Tint Base B6201
Satin Espresso B6212
Satin Honey B6230
Satin Pecan B6252
Satin Bombay Mahogany B6254
Satin Classic Oak B6256
Satin Mission Oak B6258
Satin Antique Walnut B6260
Satin American Chestnut B6262
Gloss Clear Tint Base B6301
Gloss Espresso B6312
Gloss Honey B6330
Gloss Pecan B6352
Gloss Bombay Mahogany B6354
Gloss Classic Oak B6356
Gloss Mission Oak B6358
Gloss Antique Walnut B6360
Gloss American Chestnut B6362
See Full SDS, Product Data & Safety
WARRANTY
For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
