Interior Primer & Sealer | BEHR® Interior Drywall Plus | Behr

BEHR® Drywall Plus Primer & Sealer

Avg. Rating:

For excellent performance under flat and eggshell paints, choose BEHR® Drywall Plus Primer & Sealer. This 100% acrylic formula is more versatile than PVA primers, making it ideal for wood, woodboard, drywall and other porous surfaces in all your home's low-moisture rooms. It also seals untreated wood, and it's tintable to allow for dramatic color change.

1 gal can of Behr Drywall Plus Primer & Sealer

Finish

A non-reflective finish that has excellent performance under a flat or eggshell paints.

Best For Use In

Ideal for Drywall, Plasterboard, Wallboard, Wood and Brick.

Coverage

250-400 Sq. Ft. per Gallon

PRODUCT USAGE
  • Clock icon

    30 Min Dries to Touch
    1 HR Ready to Topcoat

  • Paint coverage icon.

    250-400 Sq. Ft 
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

  • Over properly prepared uncoated and previously painted Interior surfaces in low-moisture areas.
  • Ideal for Drywall, Plasterboard, Wallboard, Wood and Brick.
  • Not recommended under HI-GLOSS paint.
  • Bright or deep colors require a tinted primer.
  • Have this product tinted close to topcoat color with no more than 2 ounces of colorant per gallon.

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • New brick should be thoroughly dried out; test pH prior to applying primer.
  • The pH must be under 9.0 before coating.
  • Existing brick should be free of any soot, ash, creosote, grease or other stains which could affect adhesion of the primer.
  • Remove efflorescence with a mixed solution of one part vinegar and one part water, rinse thoroughly with clean water and allow to dry.

Read More

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Use a high-quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019” spray tip, 60 mesh filter).
  • Stir primer occasionally.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Read More

Reviews

WARRANTY

LIFETIME LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot