BEHR PREMIUM® Protector & Waterproofer
Protect your home's concrete and masonry surfaces with BEHR PREMIUM Concrete & Masonry Protector & Waterproofer. This waterproofer is formulated with Silicone to penetrate into the surface to help keep water out and shield against salt damage and corrosion.
SURFACES MAY BECOME SLIPPERY WHEN WET. USE CAUTION WHEN WALKING ON SURFACE WHEN MOISTURE IS PRESENT
Finish
Natural Finish
Best For Use In
Horizontal and Vertical uncoated Concrete and Masonry surfaces such as: Concrete Block, Pavers, Stucco, Brick, Unglazed Tiles, Exposed Aggregate Concrete, Sandstone and Slate.
Coverage
250 Sq. Ft per Gallon
PRODUCT USAGE
-
Spread Rate
250 Sq. Ft -
24-48 Hr. to cure
-
Soap & Water
Clean-Up -
Protect
from Freezing
Horizontal and Vertical uncoated Concrete and Masonry surfaces such as: Concrete Block, Pavers, Stucco, Brick, Unglazed Tiles, Exposed Aggregate Concrete, Sandstone and Slate. Not recommended for use on areas subject to hydrostatic pressure such as basement walls or floors.
Preparation
- New concrete must cure for a minimum of 30 days.
- Remove old coating or sealer, if present, using a concrete & masonry paint stripper product.
- For proper penetration and adhesion, use a concrete & masonry cleaner & etcher product.
- TEST: Sprinkle a few drops of water onto the surface. If water is quickly absorbed, the surface is ready. If not absorbed, re-etch.
Read More
Application
- DO NOT THIN. Stir or shake before applying.
- Use product when temperature is between 50–90°F (10-32°C).
- Apply until saturated by brush, roller or garden sprayer to a dry surface.
- Remove any puddles by spreading product to drier areas or by wiping up excess with a clean cloth.
- On vertical surfaces, apply from the bottom up and saturate well.
Read More
Dry Time
- Once dried, rough, vertical surfaces may be coated with an oil or latex-based paint or primer. Follow all label instructions. Do not paint horizontal surfaces after applying this product.
Read More
Disposal
- Clean all equipment immediately with warm, soapy water.
- Properly dispose of all soiled rags and protect unused product from freezing.
- For disposal of empty containers and unused paint, contact your household refuse collection service.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
WARRANTY
Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 10 years on vertical and horizontal surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
