BEHR® Metal Primer
For excellent performance on clean or sound rusty Interior/Exterior metal surfaces, choose BEHR® Metal Primer. This innovative formula can be applied directly to rust with minimal surface preparation, making it an ideal primer choice for painting metal doors, railings, fences, and garage doors. This water-based formula is ready to topcoat in one hour and has easy water clean-up once you are done with your project.
Finish
Dries to a non-reflective finish which helps create a uniform topcoat sheen.
Best For Use In
Use on Clean or Sound Rusty Metal Surfaces
Coverage
350-450 Sq. Ft.
PRODUCT USAGE
-
30 Min Dries to Touch
1 Hr Ready to Topcoat -
350-450 Sq. Ft.
Coverage per Gallon -
Soap & Water
Clean-Up -
Protect
from Freezing
- Over properly prepared uncoated and previously painted Interior/Exterior ferrous and non-ferrous metal surfaces.
- Ideal for ferrous metal surfaces, such as: Steel, Carbon Steel, Stainless Steel, Cast Iron, Wrought Iron, Galvanized Steel; and non-ferrous metal surfaces, such as: Brass, Aluminum, Copper, Lead, Nickel, Tin, Titanium, Zinc and Metal Alloys.
- Bright or deep topcoat colors require primer to be tinted (add no more than 4 fluid ounces of colorant per gallon).
Preparation
- All surfaces must be properly prepared, cleaned and primed on the same day.
- Remove all loose or peeling paint; wash off chalk, dirt and grease with mild detergent, rinse well and allow to dry.
- Remove mildew stains with a mildew stain removing product.
- Scuff sand glossy surfaces and repair imperfections.
- Remove all loose dust and rust particles with a wire brush and dry cloth.
- In some cases, scraping or sanding may be needed to allow the primer to adhere.
- Do not use if surface is structurally unsound or severely deteriorated.
Read More
Application
- Apply when air and surface temperatures are between 40-90°F (4-32°C).
- Use a high quality 1/4 - 3/8" nap roller cover, nylon/polyester brush or an airless sprayer (.011"-.017" spray tip, 60 mesh filter)
- Stir primer occasionally.
- Do not thin if using a roller or brush; however, if using a sprayer and thinning is necessary to maintain workability, thin with clean water at a rate of no more than 1/2 pint per gallon.
Read More
Disposal
- For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
Read More
Read More
Reviews
How-To
Find step-by-step instructions in our how-to articles and videos.
SDS AND DATA SHEET
WARRANTY
LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
