Back to Exterior Painting How-To's
How to Repair a Hole on a Wood Surface
Refresh your house with a fresh coat of paint. Make sure to repair any holes in your wood surfaces first.
For Best Results:
Refer to our how-to for step-by-step techniques.
Suggested Tools & Supplies
- Ladder
- Patching Material
- Protective Apparel
- Putty Knife
- Rags
- Sandpaper (100, 220 Grit)
- Vinyl Gloves
-
Step 1
Using 100-grit sandpaper, lightly sand any raised or rough edges around the hole. Remove any dust or debris from the area with a lightly water-dampened rag.
-
Step 2
Using a putty knife, spread a thin layer of patching material into the hole. Allow it to dry.
TIP: To create an even surface, always smooth out (feather) the patching material 1"-2" beyond the repaired area.
-
Step 3
Use 220-grit sandpaper to smooth the patched area and make it even with the surface.
TIP: If shrinking of the patching material occurs, lightly sand and clean the area and apply additional layers of patching material as needed.
-
Step 4
Remove any final dust or debris from the finished repair.
More How-Tos
ADDITIONAL RESOURCES
PAINT AND STAIN CALCULATOR
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.
Calculate
ASK AN EXPERT
Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.
Get Expert Help
CONNECT WITH PRO REFERRAL - POWERED BY THE HOME DEPOT
Let Pro Referral do the leg work and match you with quality local painters.
Find a Painter
